Car Seat cover Nampa grey
- High quality fabrics, best processing
- TÜV Rheinland tested* - compatible with side airbag (*see at tuv.com, retrievable test report of 22.12.2022 with Certipedia-ID 0000026199)
- Scope of Delivery: 2 Front Seat Covers, 2-piece, 1 Rear Seat Cover, 4-piece, 5 Head Rest Covers
€32.95
(UVP)Ready for dispatch in 3-4 business days
Please contact our customer service, we will deal with your request as soon as possible.
- Colour : black-grey
- Article Size: Universal
- Side Airbag : Yes
- Mounting Type : Hook
- Mounting Type Head Rest: Mounting Tape
- Material Composition : 100% Polyester
- Scope of Delivery: 2 Front Seat Covers, 2-piece, 1 Rear Seat Cover, 4-piece, 5 Head Rest Covers
- Compatible with integrated seat heating
- The head rest of your front seat must be detachable.
- Only suitable for standard normal and sport seats (not for standard RECARO sport seats).
- Your car seats have to have an opening between the back rest and the seating part.
- Thanks to our zip system, the car seat cover for the rear seat backrest is suitable for both a 50:50 split and a 1/3 to 2/3 split.
- As a matter of course, our seat covers are ISOFIX compatible, so that you can continue to use the system in your vehicle, if available.
Best protection for your car seats
You drive around in your car every day and need a protection for your car seats to keep the upholstery beautiful for as long as possible. The seat cover set Nampa meets your requirements exactly. Modern design, simple assembly and good material quality are combined in one product, so that you can enjoy the new seat covers for a long time. The article is universally suitable for many common car types and consists of two front seat covers, one back seat cover and 5 headrest covers.
The features at a glance
The seat cover set, in modern black-grey, is light- and colour-fast and can be cleaned by hand with a damp cloth. Furthermore, the front seat covers of the complete set Nampa are equipped with the CLIX III system and therefore, suitable for all car seats with and without side airbag. This can save lives in an emergency and you and your passengers are always safe in the car.
Easy mounting
The complete set Nampa is very easy to install. Remove the headrests and pull the backrest and seat part over the original seat. Then fix the cover with hooks under the seat and you can easily reinstall the headrests through the integrated mounting stripe. Cut two little holes along the indicated lines and then place the headrests back into place.
For careful and gentle cleaning and care, we recommend hand washing at a maximum of 40°C in warm water using a coloured detergent.
Material Composition : 100% Polyester: 0,6000 kg
Manufacturer: Walser
- There are no restrictions for vehicles without side airbags
- For vehicles with side airbags, please note the TÜV report
Login
A satisfied customer says
16 December 2019 17:14
Sehr Schöner Sitzbezug
Das Produkt entspricht zu 100% meinen Erwartungen. Sehr Qualitativ und Rubust Toll!!!
On: 15.09.2017
Schauen super aus und die Qualität stimmt
Schauen super aus und die Qualität stimmt
On: 16.12.2019
Sehr Schöner Sitzbezug
Das Produkt entspricht zu 100% meinen Erwartungen. Sehr Qualitativ und Rubust Toll!!!
On: 12.01.2018
sehr empfhelenswert
Gute Qualität der Bezüge , passt gut , gute Verarbeitung
On: 12.09.2019
Ware entspricht dem Angebot, alle bestens
Ware entspricht dem Angebot, alle bestens
On: 08.08.2017
Soüer Ware, schneller Versabd, gerne wieder !
Soüer Ware, schneller Versabd, gerne wieder !
On: 05.12.2018
Gutes Preis-Leistungsverhältnis.
Das Produkt entspricht meinen Erwartungen, das Preis-Leistungs-Verhältnis ist gut, die Verarbeitung ist auch in Ordnung.
On: 04.10.2017
alles o.k.
alles Super
On: 12.08.2017
sieht gut aus
sieht gut aus
On: 31.07.2017
Sehr gut kann ich weiter empfehlen
Passt sehr gut super Material
On: 30.05.2017
Autositz Bezug Nampa grau
Die Sitz Bezüge sind qualitativ sehr gut und sind auf den Sitzen gut anzubringen. Allerdings konnten wir an der hinteren Rückenlehne den Bezug nicht anbringen, da die Rückenlehne aus 2 Teilen besteht und wir oftmals zum Transportieren nur eine Lehne umklappen. Das ist natürlich bei dem durchgängigen Bezug nicht möglich. Bei zweigeteilte Sitzen müßte man evtl. Je nach Modell den Lehnbezug 2tlg. anfertigen.